Ships fully assembled for rapid deployment and roll into place on heavy-duty pre-installed casters.\nFront and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and convenient. The easy-view depth index ensures consistent rail placement without requiring time-consuming measurements.\nToolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers. Mounting slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can accommodate two vertical PDUs or cable managers side-by-side (four items per enclosure).\nEnclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws\nTextured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses.\nMassive front to rear ventilation capacity. 65+% open space in door perforation pattern meets or exceeds server manufacturer requirements.\nMaximum usable internal depth of 37 inches/94 cm (front to rear rail).\nWeight ratings of 3500 lbs (1588 kgs) stationary and 2250 lbs (1020.6 kgs) rolling.\nFront door is locking, reversible and removable.\nSecure cable channel, prevents other users from tampering with cables\nRear doors are locking and reversible.\nLocking removable side panels are 'half size' to make them smaller and lighter improving ease of installation and servicing. Two side panels per side (4 panels total). Side panels are keyed alike to the front and rear doors.\nBuilt in baying tabs allow enclosures to be combined securely in rows. Center-to-center width can be set at 600mm or 24" to match standard data center floor tiles.\nCasters are pre-installed and support a rolling load capacity of 2250 lbs (1020.6 kgs)s, allowing the enclosures to be pre-configured and rolled to the final installation location. Casters are removable.\nLeveling feet extend to allow enclosure to be positioned on uneven floors. Levelers are removable.\nCompact design allows the enclosure to roll through standard height commercial doorways.\nConvenient grounding system. All components are grounded to the enclosure frame which includes multiple connections for facility ground. Front and rear doors include quick-release ground wires.\nOpen bottom for cable access.\nTop panel has generous cable access holes. Panel can be removed toollessly in seconds without having to disconnect cables first.\nIncluded stabilizing brackets are used for shipment and can be reattached at the bottom of the enclosure frame on the inside or outside of the rack.\nMeets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) Compliance\nCompatibility with airflow optimization accessories as well as cable management accessories.
Brand
- Eaton
