The VM2120 is a multifunctional amplifier that can be mounted in an EIAStandard equipment rack (3unit size). The unit comes with 4 audio inputs including the background music input, and the speaker output section which has an internal attenuator and 5zone selector. It permits not only generalpurpose broadcast, but also Emergency Broadcast based on the EN60849 Standard which gives prerecorded voice instructions (optional EV200M is required) in the emergency situation. Broadcast can be made from an optional RM200M Remote Microphone as well as from the amplifier, and can be remotely controlled from external equipment. In addition, for 100 V application the unit features the surveillance function (optional SV200MA is required) which automatically checks the system for failures. Microprocessorcontrolled PA management amplifier, as a table top unit or with optional brackets in standard 19inch cabinet racks can be mounted. Three balanced inputs for microphone or recording with control inputs, height / low tone control and switchable phantom power via XLR combo jacks, transformers easily retrofitted. Input for telephone announcements. The output circuits 15 can be associated separately each of the abovementioned inputs. Up to 4 auditable digital stations can be connected via an RJ45 connection. Two audio inputs for background music with two cinch Sockets and level before controllers, as well as height / low tone control. There are 5 levels of priority. 100 V power amplifier with 120 Watt of power, idlesecure and shortcircuit protected, easily convertible to 70 V or 50 v 5 output circuits, individually zuschaltand adjustable in steps 0, 3, 6,10,15 and 20 dB at any power sharing as well as a collective call key. Switching display using LEDs. In the transmission of signals with highpriority automatic bypass the volume control and display of duty call operation. Compulsory control contact for external volume control. 100V input to the 5 circles, output switchable by external duty call signal from parent PA headquarters, or switchedoff device. According an exit before and after the total volume control to the use of additional amplifiers. Recording output for the master signal. Simple combination of two management systems to extend to 10 circuits and power increase possible. Additional control inputs for: throwing the text rendering of the digital text storage, remote activation, start and stop of alarm texts, activation of the 100VEingangs. Fault status outputs for: power and emergency power supply, receivers and amplifier combination connection, errors in the text memory. Labels for the front taxable inputs and outputs. In emergency mode play of two texts for warning and evacuation. Digital text storage and monitoring module can be retrofitted.
Brand
- TOA UK
