ATEN VE814A is an HDBaseT Video Extender that is capable of sending HDMI signals up to 100 m over a single Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable. Featuring dual synchronous outputs, the VE814A can transmit video signal to two remote displays and one at the local side. This HDCP 2.2-compliant extender meets the HDMI Specification, including 3D, Deep Color, the maximum data rate of (10.2 Gbps), and 4K video quality up to 100 m.\nThe VE814A supports RS-232 and IR signaling pass-through, allowing you to control the HDMI source device from the remote unit (VE814AR) while granting access to the HDMI display device from the local unit (VE814AT). In addition, it supports Long Reach Mode that extends HDMI signals up to 150 m, 1080p, via a single Cat 5e/6 cable.\nThe VE814A is a powerful solution for where digital signage is required, such as bars, educational spaces, and public transportation stations, allowing display of identical contents at different spots.
Remote (IR) Output
- 2
Maximum Refresh Rate
- 60 Hz
Cable Types Supported
- Cat5e, Cat6, Cat6a
RJ-45 Output Ports
- 1
HDCP Version
- 2.2
Transmitter Weight
- 450 g
Receiver Weight
- 470 g
Number of HDMI Outputs
- 3
Transmitter Dimensions (WxDxH)
- 123 x 140.2 x 30 mm
RJ-45 Input Ports
- 1
HDCP
- Yes
Remote (IR) Input
- 2
Receiver Dimensions (WxDxH)
- 123 x 140.2 x 30 mm
HDMI In
- 1
Extended Display Identification Data (EDID)
- Yes
Electrostatic Discharge (ESD) Protection
- 15 kV
IR Blaster Included
- Yes
IR Receiver Included
- Yes
Infrared (IR) Frequency Range
- 30 - 56 kHz
Storage temperature (T-T)
- -20 - 60 °C
Material
- Metal
Product Colour
- Black
Quantity per pack
- 1 pc(s)
Bandwidth
- 340 MHz
Operating temperature (T-T)
- 0 - 50 °C
Operating relative humidity (H-H)
- 0 - 80%
Connectivity technology
- Wired
Maximum transfer distance
- 150 m
Rack Mounting
- Yes
Maximum Resolution
- 4096 x 2160 pixels
AC Adapter Included
- Yes
3D
- Yes
Supported Graphics Resolutions
- 1920 x 1080 (HD 1080), 3840 x 2160, 4096 x 2160
HDBaseT Port
- Yes
Plug and Play
- Yes
DC-In Jack
- Yes
Brand
- ATEN
UK Address:
466 Malton Avenue,
Slough,
SL1 4QU,
United Kingdom
Website (UK): www.aten.com/eu/en
Email (UK): support@aten.co.uk
EU Address:
Mijnwerkerslaan 34,
3550 Heusden-Zolder,
Belgium
Website (EU): www.aten.com/gb/en
Email (EU): support@aten.be
Aten GPSR Compliance Statement
This product complies with the General Product Safety Regulation (GPSR) and meets all relevant EU safety standards.
For detailed compliance documents, please review the provided link above.
If you have any questions or require further assistance, you can:
- Contact the manufacturer directly at the listed addresses or support emails.
- Email Northamber Product Safety at productsafety@northamber.com.
