SmartRack® SRBOLTDOWN provides extreme stabilization and security for cabinets and racks. The bolt-down kit enables SmartRack to be secured to a concrete floor. SRBOLTDOWN includes four concrete inserts, four bolts and four fender washers.
Technical Notes: We recommend using a 1/2-inch concrete drill. Hole must be 4.5 inches to 4.75 inches deep. Mark the hole, drill the hole, then tap the anchor into the hole. Thread the bolt into the anchor a few threads only. Tap the bolt with a hammer (with anchor attached) until it bottoms out in the hole, then tighten the bolt.
Technical Notes: We recommend using a 1/2-inch concrete drill. Hole must be 4.5 inches to 4.75 inches deep. Mark the hole, drill the hole, then tap the anchor into the hole. Thread the bolt into the anchor a few threads only. Tap the bolt with a hammer (with anchor attached) until it bottoms out in the hole, then tighten the bolt.
Product Colour
- Aluminium
Package width
- 104.9 mm
Package depth
- 152.9 mm
Package height
- 26.9 mm
Country of origin
- China
Harmonized System (HS) code
- 8302.50.0000
Package weight
- 450 g
Compliance Certificates
- RoHS
Master (Outer) Case GTIN (EAN/UPC)
- 10037332144604
MPN
- SRBOLTDOWN
Brand
- Tripp Lite
