Monday - Friday | 9:00 - 5:30pm
Order before 5pm for same day despatch
Ask about our Config Services

Tripp Lite B127A-111-BHTH HDMI over Cat6 Extender Kit, Transmitter and Receiver with Repeater, 4K 60Hz, 4:4:4, IR, HDR, PoC, 230 ft., TAA

Stock Code: TLCBL1297

£199.56 ex VAT

HDMI Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls This complete transmitter and transceiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127A111BHTH extends 4K signals from an HDMI source device to an HDMI display up to 230 feet away via usersupplied Cat6 cabling. IR remote control lets you operate the source from the display end of the installation.

Transmits CrystalClear 4K Video with MultiChannel Audio, HDR and 4:4:4 Color The B127A111BHTH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTSHD, Dolby TrueHD and 7.1channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for toplevel PC gaming or using your HDTV as a PC monitor. Builtin equalization allows you to finetune the image quality at the remote display.

Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution To monitor the video signal being extended to the transceiver, connect a 4K display to the transmitter’s local HDMI port with a usersupplied HDMI cable. This port does not support multiresolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

BuiltIn PoC Technology Provides Transceiver Power to Avoid Bulky External Power Bricks Power over Cable (PoC) technology powers the transceiver over Cat6 cable. LEDs on both the transmitter and transceiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the transceiver where needed without worrying about finding a nearby AC outlet.

Create a Daisy Chain to Achieve Even More Distance This extender kit is capable of forming daisychain installations up to 920 feet from the transmitter by connecting additional B127A110BH transceivers (sold separately). Up to four total B127A110BH transceivers can be chained together, each capable of extending a 4K/60 Hz signal up to 230 feet per unit. The transceiver is also compatible with Tripp Lites B127A010H signal booster (sold separately), which allows the signal to be boosted up to 400 feet total between the transmitter and transceiver. When used in a daisychain installation, this brings the total extension distance up to 1,090 ft. Note : B127A010H will only work when used in the first link of the daisychain installation.

PlugandPlay Operation for Quick Setup and Immediate Use The included transmitter and transceiver units work right out of the box with no software required. Mounting hardware is included for installing the transmitter on a wall, pole or 19inch rack. Connect the transmitter to the source with a usersupplied HDMI cable (such as Tripp Lite’s P568 or P569Series). Then, connect the transceiver to the display with another usersupplied HDMI cable. Finally, connect the two units with usersupplied Cat6 patch cable (such as Tripp Lite N202Series cable).

TAACompliant for GSA Schedule Purchases The B127A111BHTH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

We have placed cookies on your device to help make this website better.

Your Basket