Monday - Friday | 9:00 - 5:30pm
Order before 5pm for same day despatch
Ask about our Config Services

Tripp Lite B127A-004-BH 4-Port HDMI over Cat6 Splitter - 4K 60 Hz, HDR, 4:4:4, PoC, HDCP 2.2, 230 ft. (70.1 m), TAA

Stock Code: TLCBL1290

£275.66 ex VAT

HDMI QuadOutput Splitter Ideal for Digital Signage in Schools and Workplaces This 4K transmitter/splitter is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.

Extends a 4K A/V Transmission up to 230 ft....or Even Farther The B127A004BH connects to Tripp Lite B127ASeries receivers to extend 4K signals from an HDMI source to four HDMI displays up to 230 feet (70.1 meters) away via usersupplied Cat6 cabling. By adding Tripp Lite B127A010H signal repeaters or B127A110BH transceivers (each sold separately) to the application, you can extend the signal to each connected display up to 400 feet (121.9 meters) or 460 feet (140.2 meters), respectively.

Transmits CrystalClear 4K Video with MultiChannel Audio, HDR and 4:4:4 Color The B127A004BH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with true uncompressed 7.1channel digital audio and Dolby TrueHD. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This splitter also supports 4:4:4 chroma subsampling for toplevel PC gaming or using your HDTV as a PC monitor.

MultiResolution Support Allows Mixing and Matching of Displays of Different Resolutions Say you have a brand new 4K/60 Hz HDTV in one room, but want to also connect your Bluray player or satellite box to an older 1080p TV in another room. The B127A004BH is backward compatible with 4K/30 Hz and 1080p resolutions via automatic switching, allowing each connected monitor to display video at its maximum resolution.

Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution and Cascading To monitor the video signal being extended to the receiver, connect a 4K display to the splitter’s local HDMI port with a usersupplied HDMI cable. This port does not support multiresolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly. Add even more displays to an installation by connecting an additional B127A splitter unit (sold separately) to the port.

BuiltIn PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks Power over Cable (PoC) technology powers the connected receivers over Cat6 cable. LEDs indicate when the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receivers where needed without worrying about finding a nearby AC outlet.

PlugandPlay Operation for Quick Setup and Immediate Use The splitter works right out of the package with no software required. Mounting hardware is included for installing it on a wall, pole or 19inch rack. Connect the splitter to an HDMI source device with a usersupplied HDMI cable (such as Tripp Lite’s P568 or P569Series). Then, connect the splitter to Tripp Lite B127ASeries remote receivers with usersupplied Cat6 cable (such as Tripp Lite’s N202Series).

TAACompliant for GSA Schedule Purchases The B127A004BH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

We have placed cookies on your device to help make this website better.

Your Basket