WELCOME TO THE ALL NEW NORTHAMBER.COM WEB SITE - EXISTING USERS PLEASE RESET PASSWORD.

Monday - Friday | 9:00 - 5:30pm
Order before 5pm for same day despatch
Ask about our Config Services

Tripp Lite B126-1A1-U HDMI over Cat5/6 Extender Kit, Transmitter/Receiver for Video/Audio, USB Powered, Up to 125 ft. (38 m), TAA

Stock Code: TLCBL1276

The B1261A1U HDMI over Cat5/Cat6 Active Extender Kit includes a transmitter unit and a receiver unit that work in tandem to extend an HDMI audio/video signal to an HDMI projector, monitor or television. The kit is ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than conventional cables allow. A latching HDMI connector on the builtin cable provides a more secure connection The transmitters builtin HDMI cable connects to the audio/video source, and the receivers builtin HDMI cable connects to the display. Cat5e/6 cable connects the two units (for best results, use 24 AWG solidwire Cat5e/6 cable, such as Tripp Lites N202Series). Each unit is powered by an included USB MicroB to USBA cable, which must be connected between the unit and a USB port on the source device, display or USB wall charger. You can also connect an optional HDMI monitor to the transmitters local port with a usersupplied HDMI cable, such as Tripp Lites P568Series. The B1261A1U can extend a 1080p (@ 60 Hz) signal up to 125ft. (38.1 m) with full, rich stereo. Builtin RJ45 LEDs indicate the units are receiving power and a signal from the source. Builtin equalization control lets you finetune the image quality at each remote display. Easy to set up with no software or drivers to install. Works with all operating systems and HDMI sources. Extends HDMI Audio/Video Signals to an HDMI Display Extends a 1080p (@ 60 Hz) signal up to 125ft. (38.1 m) Ideal for digital signs, trade shows, presentations, classrooms, churches and retail settings Transmitter and receiver connect with one Cat5e/6 cable (for best results, use 24 AWG solidwire Cat5e/6 cable, such as Tripp Lites N202Series) Supports stereo audio and HDCP Builtin equalization control lets you adjust the image on the remote display Easy to Set Up and Use Plugandplay engineering—no software, drivers or external power supply Powered via included USB cables Units connect quickly to source and display with builtin HDMI cables Builtin cable includes latching HDMI connector for a more secure connection Optional local HDMI monitor connects to transmitter with usersupplied HDMI cable LEDs indicate when units are receiving power and a signal from the source Works with all operating systems and HDMI sources TAACompliant Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

We have placed cookies on your device to help make this website better.

Your Basket